Using Serial Access to Device

To access the device's serial interface, you must connect a USB cable to your computer's USB port.

You can use two types of cables:

■

Using the RJ-45 to USB cable (supplied), which connects to the device's RJ-45 Console port.

■

Using a standard USB-C to USB-A cable, which connects to the device's terminal (USB-C) port.

Once the cable is connected, a new COM device is created on your computer (see device manager under USB devices).

Open a terminal utility (e.g., PuTTY) to connect to the serial COM device and access the device's CLI. The speed of the serial COM device is 115200 (bps).

Once connected, see Reconfiguring Default IP Address to Match Network Settings.